The Bronx is a borough of big buildings. Art Deco apartment houses line the Grand Concourse, large pre-war walk-ups and elevator buildings fill Fordham, Highbridge and Kingsbridge, and complexes like Parkchester and Co-op City house entire neighborhoods. LA New York Pump services the heating pumps, booster systems, controls and ejectors that keep these buildings livable, along with the pumps in Bronx homes and businesses.
We inspect, discover and fix. For superintendents, managing agents and co-op boards, that means a clear diagnosis and a practical plan, not guesswork. If you manage several Bronx buildings, see how we work with property managers and building portfolios.
Steam Heat and the Pumps Behind It
Many pre-war Bronx buildings still heat with steam. Two-pipe systems use condensate return pumps and boiler feed pumps to get water back to the boiler, and some larger buildings add vacuum pumps. During heat season, which in New York City runs from October through May, a failed pump can trip the boiler on low water and leave a whole building without heat, and often without hot water. The usual culprits are worn seals and bearings, stuck floats, corroded receivers and pumps damaged by hot condensate coming back from failed steam traps.
We repair and replace heating and condensate pumps, repair or replace worn pump motors, and check the controls that tie the system together. Buildings that have converted to hot water heat use circulator pumps, which we service as well.
Getting Water to the Top Floors
Buildings taller than roughly six stories cannot rely on city water pressure alone. Older Bronx buildings typically use house pumps to fill a roof tank, while newer and renovated properties use booster pump systems. Low pressure on upper floors, pumps that run constantly and tanks that overflow usually trace back to worn pumps, failed level switches or problems in the pump control panel.
Repair or Replace?
A lot of the equipment we see in Bronx cellars has been running for decades. Sometimes a rebuild is the smart move; sometimes replacing an old pump with a properly sized, more efficient one makes more sense over the next several heat seasons. Our article on pump repair vs. replacement walks through how we help owners make that call.
Homes, Waterfront and Industrial Sites
Beyond apartment buildings, we service sump pumps and sewage ejector pumps in homes across Riverdale, Throgs Neck, Pelham Bay and City Island, where waterfront streets can flood in coastal storms. In Hunts Point and Port Morris, warehouses, food businesses and light-industrial shops call us for booster pumps, ejectors and air compressors.
What Bronx Buildings Need Most
- Condensate, boiler feed and vacuum pump repair
- House pump and booster pump service for roof tank buildings
- Pump control panel and level control troubleshooting
- Sewage ejector service for cellars and basement units
- Pre-season inspections before heat season starts
For pump service anywhere in the Bronx, call LA New York Pump at (631) 565-9577. We are available 24/7 for heating pump failures, loss of water pressure and other building emergencies.
Towns and neighborhoods we serve in The Bronx
- Mott Haven
- Port Morris
- Hunts Point
- Highbridge
- Concourse
- Fordham
- Belmont
- Kingsbridge
- Riverdale
- Norwood
- Morris Park
- Parkchester
- Soundview
- Throgs Neck
- Pelham Bay
- City Island
- Co-op City
- Wakefield